Makita M9502R Instruction Manual page 11

COMBINATION OF APPLICATIONS AND
ACCESSORIES
Optional accessory
CAUTION:
Using the tool with incorrect guards can cause risks as follows.
When using a cut-off wheel guard for facial grinding, the wheel guard may interfere with the work-
•
piece causing poor control.
When using a grinding wheel guard for cutting-off operations with bonded abrasive wheels and dia-
•
mond wheels, there is an increased risk of exposure to rotating wheels, emitted sparks and particles,
as well as exposure to wheel fragments in the event of wheel burst.
• When using dual purpose (combined grinding and cutting-off abrasive) flange mounted wheels, only
use a cut-off wheel guard.
2
3
4
5
-
1
2
3
4
5
6
7
8
9
-
NOTE: *1 Clip-on cutting wheel guard attachment is not available in some countries. For more details, refer to the
instruction manual of the clip-on cutting wheel guard attachment.
6
3
7
8
5
Application
-
-
-
Grinding
-
-
Cutting-off
Grinding / Cutting-off
-
-
11 ENGLISH
2
9
7
115 mm model
Side grip
Wheel guard (for grinding wheel)
Inner flange
Depressed center wheel
Lock nut
Wheel guard (for cut-off wheel)
Abrasive cut-off wheel / Diamond wheel
Dual purpose wheel
Clip-on cutting wheel guard attachment *1
Lock nut wrench
3
8
5
125 mm model