Arlo Pro Camera Led - NETGEAR Arlo Pro VMS4330-100EUS User Manual

Arlo Pro Camera LED

The LED on the camera lights when the camera is powered on. The LED changes
color and blinks depending on the battery charge and to indicate the status of
activities such as syncing the camera and updating the camera firmware.
See the following table for explanations for the Camera LED.
Camera Color and Action
LED
Solid blue
Fast blinking blue for 3
seconds
Fast blinking blue for 10
seconds
Solid amber
Blinking amber once per
minute
Fast blinking amber for 3
seconds
Fast blinking amber for 10
seconds
Blinking blue and amber
Set Up Your System
Meaning
The camera is connected to the Quick Charge 9v power
adapter and is fully charged.
The camera is connected to the Quick Charge 9v power
adapter and is charging.
The camera synced to the base station.
The camera is booting.
Low battery (15% or less)
The camera is not charging. It is connected to a 5v charger
instead of the Quick Charge 9v power adapter that came in
the package with the camera.
The camera failed to sync to the base station.
A firmware update is in progress. DO NOT TURN OFF THE
CAMERA.
10