Drive Chain Housing - Yamaha RS VECTOR Owner's Manual

Periodic maintenance and adjustment
11. Rotate the secondary sliding sheave
clockwise and push it so that it separates
from the secondary fixed sheave.
1. Secondary sliding sheave
2. Secondary fixed sheave
12. Install the V-belt between the secondary
sliding and fixed sheaves.
1. V-belt
13. Place the left lower cover in the original
position, and then install the screws and
the bolts.
RST90PGT).
90
(RS90P / RS90PLT /
RS90P / RS90PLT / RST90PGT
1
1. Left lower cover
14. Install the drive guard, and then install the
left side cover and the shroud, or close
the shroud.
ESU13924

Drive chain housing

To check the drive chain housing oil
level
1. Place the snowmobile on a level surface
and apply the parking brake.
2. Remove the shroud and the right side
cover [RS90P / RS90PLT / RST90PGT
(see page 62 for the procedures)], or
open the shroud [RST90 (see page 66 for
the procedures)].
3. Remove the dipstick, wipe it off with a
clean rag, and then insert it back into the
filler hole.
RS90P / RS90PLT / RST90PGT
1. Dipstick
1