Skis And Ski Runners - Yamaha RS VECTOR Owner's Manual

To measure the drive sprocket wear
Measure the drive sprocket tooth width at the
measuring line shown. If the tooth width is 13
mm (0.51 in) or less, replace the drive sprock-
et.
1
2
3
1. Drive sprocket tooth
2. Measuring line
3. Drive sprocket tooth width
ESU12144

Skis and ski runners

Check the skis and ski runners for wear and
damage. Replace if necessary.
1. Ski runner wear limit
Periodic maintenance and adjustment
1
1
2
1. Ski wear limit
2. Ski runner
Ski runner wear limit:
RS90P 6.0 mm (0.24 in)
RS90PLT 6.0 mm (0.24 in)
RST90 8.0 mm (0.31 in)
RST90PGT 6.0 mm (0.24 in)
Ski wear limit:
RS90P 12.0 mm (0.47 in)
RS90PLT 12.0 mm (0.47 in)
RST90 24.0 mm (0.94 in)
RST90PGT 12.0 mm (0.47 in)
ECS00560
NOTICE
Avoid scratching the skis when loading
and unloading the snowmobile, when
riding in areas with little or no snow, or on
sharp edges such as concrete, curbs, etc.
This will wear or damage the skis.
To align the skis
1. Turn the handlebar so the skis face
straight ahead.
2. Check the following for ski alignment:
Skis are facing forward.
●
Ski toe-out (distance A – distance B) is
●
within specification.
95