Yamaha RS VECTOR Owner's Manual page 115

1
1. Air filter case fastener
2. Air temperature sensor coupler
5. Loosen the joint clamp bolts.
1. Joint clamp bolt
6. Slide the oil tank breather hose clamp
away from the air filter case, and then dis-
connect the oil tank breather hose.
1. Oil tank breather hose clamp
2. Oil tank breather hose
Periodic maintenance and adjustment
2
1
1
2
7. Lift up the air filter case, disconnect the
ISC (Idle Speed Control) unit inlet hose
and cylinder head breather hose from the
case, and then remove the case.
1
1. Cylinder head breather hose
2. ISC (Idle Speed Control) unit inlet hose
8. Unhook the battery band, and then re-
move the battery cover.
1. Battery cover
2. Battery band
9. Disconnect the negative battery lead by
removing the bolt.
2
1
2
109