High Beam Indicator Light - Yamaha RS VECTOR Owner's Manual

a digital speedometer
●
a tachometer
●
an odometer
●
a tripmeter (which shows the distance trav-
●
eled since it was last set to zero)
warning indicators (which show engine
●
trouble, coolant temperature, fuel level, and
oil level warnings)
indicator lights (which show high beam and
●
low coolant temperature conditions)
a warning light (which shows warnings to-
●
gether with the warning indicators)
a fuel meter (which shows the fuel remain-
●
ing in the fuel tank)
a grip/thumb warmer level indicator (which
●
shows the grip warmer level or the thumb
warmer level)
After the engine is started, the tachometer
needle makes one sweep, and the low cool-
ant temperature indicator light, the warning
light, and all segments of the meter unit dis-
play come on and go off.
1 2 3 4
1. Tachometer
2. Low coolant temperature indicator
light " "

3. High beam indicator light "

4. Warning light "
5. Warning indicators
6. Meter display
7. Select/reset button
The grip warmer level is initially displayed for
5 seconds, then the display switches to the
fuel meter.
5 6 7
"
"
Control functions
TIP
To switch the speedometer, odometer, and
tripmeter displays between kilometers and
miles, select the odometer mode "ODO", and
then push the select/reset button for at least
10 seconds while the snowmobile is stopped.
Odometer and tripmeter modes
Pushing the select/reset button switches the
display between the odometer mode "ODO"
and the tripmeter mode "TRIP" in the following
order:
ODO → TRIP → ODO
1
1. Odometer/tripmeter
To reset the tripmeter, push the select/reset
button for at least 1 second while the tripmeter
is displayed.
ESU10411
High beam indicator light "
The high beam indicator light comes on when
the high beams of the headlights are switched
on. (See page 24 for headlight beam switch
operation.)
"
17