Table of Contents
Advertisement
RST90
1. Passenger grip warmer switch
2. Off
3. "HI" (high)
4. "LO" (low)
RST90PGT
1
1. Passenger grip warmer switch
2. Off
3. "HI" (high)
4. "LO" (low)
ESU14050
Passenger footrests (RST90 /
RST90PGT)
The passenger footrests can be installed in
two (RST90) or three (RST90PGT) different
positions to suit the passenger's preference.
To change the position of a footrest, remove
the screws, place the footrest in the desired
position, and then install and tighten the
screws.
1. Footrest
2. Screw
ECS00131
NOTICE
Make sure that the screws are tightened
●
securely after changing the position of
the footrests.
Do not overtighten the screws, other-
●
wise the footrest may be damaged.
ESU14130
Backrest (RST90 / RST90PGT)
EWS00131
4
3
2
Do not sit on the backrest. Otherwise, you
could lose your balance, fall, and be in-
jured.
The angle (RST90 / RST90PGT) and position
(RST90PGT) of the backrest are adjustable.
To adjust the backrest angle
Turn the backrest adjusting knob until the
backrest reaches the desired angle.
Control functions
2
WARNING
1
31
Advertisement
Table of Contents
