Network Communication; Connecting To Wi-Fi Networks - Honeywell EDA50-211 User Manual

Network communication

Users can connect the terminal to wireless and wired networks. Users can get the terminal
connected via the following ways:
•
•
•

Connecting to Wi-Fi networks

When communicating through wireless networks, ScanPal EDA50-X11 transfer data
through 802.11 radios. Before connecting to a Wi-Fi network, users need to know the
Security Protocol of the network and the certificates it required. Usually, 802.11 radio is
disabled by default.
1.
2.
User Guide for ScanPal Series Terminal
802.11 radios
Bluetooth
USB
Enter Settings>Wi-Fi.
When the WLAN switch turns blue, tapping the WLAN bar will display the detected
network list.
Chapter 6: Configuring Terminal
57