Telecommunication Function; Activating Calls - Honeywell EDA50-211 User Manual

Telecommunication Function

The phone function of the terminal is realized with a speaker and a microphone. The phone
function also supports a Bluetooth headset or hands-free device. The phone function is
enabled by default.
This terminal supports the following network types:
• GSM&EDGE：Band3/Band8
• WCDMA：Band1/Band8
• FDD-LTE：Band3
• TDD-LTE：Band38/Band39/Band40/Band41
For local network carriers, please contact Honeywell technical support.
When users enable the phone function and activate the service through wireless carriers,
they can customize the phone features and network settings in the Mobile Network
interface in Settings.
Note: EDA50K-1 WWAN version supports automatic system time setting with
network messages and timezone messages (NITZ).

Activating calls

Calls can be activated by inserting Micro SIM card in the terminal. Micro SIM card can be
purchased from the network service provider.
1.
2.
3.
4.
User Guide for ScanPal Series Terminal
Turn off the terminal.
Press down the battery cover safety button to move the lock to the unlock position at
right;
Unlock the battery cover using its lock handle;
Remove the battery (remove it from its bottom end before pulling it out);
Chapter 4: Using Telecommunication Function
45