Honeywell EDA50-211 User Manual page 59

Suggestions
Automatically recommend quick access through intelligent pre-judgment of user's needs.
Wireless & networks
User Guide for ScanPal Series Terminal
Settings Introductions
To enable or disable Wi-Fi radios. When Wi-Fi is enabled,
Wi-Fi
available Wi-Fi networks can be viewed by taping this bar.
To enable or disable Bluetooth radios. When Bluetooth connection
Bluetooth is enabled, Bluetooth-enabled devices within the range can be
viewed by tapping this bar.
Displays the current usage of flow rate, including Wi-Fi and
Data usage Cellular data. (Cellular data will displayed after sim card is
inserted).
Airplane mode: to enable or disable Airplane mode.
Wi-Fi Calling: to telephone through Wi-Fi network after it is being
enabled.
NFC: enabling NFC allows NFC tag information to be read when
the terminal touches NFC tag.
Android Beam: when NFC is enabled, this function allows users to
send the application contents from the terminal directly to another
NFC-supported device when the two get closer.
More...
Tethering & Portable Hotspot: a handheld device can be used as a
wireless router to radiate the wireless network, and then other
WLAN-enabled device can receive it.
VPN: Set a password for accessing the virtual private network.
Cellular Networks: mobile network setting (EDA50K-1 WWAN)
Mobile Plan: plans provided by network carriers.
Network setting reset: reset all network setting.
Chapter 6: Configuring Terminal
53