Inserting Sd Card - Honeywell EDA50-211 User Manual

Inserting SD card

You can use a SD card to expand the memory or to install softwares. Honeywell
recommend the using of Single Level Cell (SLC) graded SD memory card or SDHC
memory card in order to achieve optimum performance and durability.
Note: format the memory card when you use it for the first time.
1.
2.
3.
4.
5.
6.
7.
8.
9.
10. Switch on the device
User Guide for ScanPal Series Terminal
Chapter 1: Product Features of ScanPal Series EDA50-X11 Terminal
Turn off the terminal.
Press down the battery cover safety button to move the lock to the unlock position at
right;
Open the battery cover with the battery cover buckle handle;
Pull out the battery (First open the battery connector side, then pull out the battery)
Open the Micro SD card's silicone cover;
Open the Micro SD card cover and insert the card;
Insert the battery (first insert one end before pressing the other end in order for it to be
connected to the device);
Press to lock the battery cover
Press down the battery cover and slide the battery cover buckle handle to lock it.
SD Card
SD Card
Slot
21