Powering On; Unlocking The Screen - Honeywell EDA50-211 User Manual

Powering on

After the battery is fully charged and installed into ScanPal EDA50-X11, turn on it for the
first time:
Press down and then release the power key.
Please note: after complete the installation instructions, the welcome interface will not
appear again. The interface appears as locked screen interface after each time you turn on
the terminal.

Unlocking the screen

Every time you turn on the terminal, you need to unlock the screen.
•
•
User Guide for ScanPal Series Terminal
Chapter 1: Product Features of ScanPal Series EDA50-X11 Terminal
Slide the lock icon to any edge of the screen to unlock it.
After the EDA50-X11 is deployed, we suggest you to set password to protect your
terminal. Tap Settings>Security>Screen lock.
15