Advertisement
R
epair
[3] DISASSEMBLY/ASSEMBLY
[3]-4. Switch Lever
DISASSEMBLING
(1) Remove Rear cover. (Fig. 2)
(2) Switch lever can now be disassembled as described in Fig. 10.
Fig. 10
1. Slide Switch knob to OFF position,
then insert 1R281 between Switch knob
and Motor housing to lock Switch knob
in the position.
1R281
Switch knob
Motor housing
3. Switch knob can now be removed.
ASSEMBLING
Switch Knob and Switch lever can be mounted in place as described in Fig. 11.
Fig. 11
1. Insert Switch lever into Motor housing
until the square loop of Switch lever's
front end is seen through the Switch knob
hole of Motor housing, and keep the loop
in the position.
Switch knob
Switch lever
Switch knob
2. Engage the hook of Switch Knob through Motor housing
Switch lever
2. Push Switch lever back towards ON position
to disconnect Switch knob from Switch lever.
4. Pull out Switch lever from Motor housing
while bending it to release the link from
the toggle of Switch.
in the square loop of Switch lever's front end.
Hook of
Switch knob
P 7/ 13
toggle of Switch
Square loop of
Switch lever's front end
Advertisement
