Cisco 8832 Manual page 9

Your Phone
Figure 2: PoE Deployment
Figure 3: Non-PoE Deployment
Onboard Your Phone with Activation Code
After your phone boots up, you will see a welcome screen where you can enter the activation code. If you
don't have an activation code, contact your administrator.
Before you begin
Your administrator provides you with a 16-digit activation code in the form xxxx-xxxx-xxxx-xxxx.
Procedure
Step 1 Enter your activation code in the field that is provided on the Welcome screen. You don't need to input the
hyphen (-) character when entering the code.
Step 2 Press Continue.
The phone completes the onboarding process automatically.
Step 3 If an error message displays, enter the code again or contact your administrator for a new code.
Create User Password on Phone
Your administrator enables your phone to prompt for Set password notification screen when your phone
reboots after every factory reset. This feature enhances the security of your phone.
Onboard Your Phone with Activation Code
Your Phone
9