Cisco 8832 Manual page 10

Auto Provision Your Phone with Short Activation Code
Procedure
Step 1
Perform one of the following:
• After factory reset, your phone reboots and you see the Set password prompt on the phone.
• Press
Step 2 In the Set password screen, set the new password in the New password box.
After you create a new password, an unlock icon appears on the phone screen.
Auto Provision Your Phone with Short Activation Code
After your phone boots up, you see a welcome screen where you can enter the activation code. If you don't
have the activation code, contact your administrator.
Before you begin
Your administrator provides your activation code:
Procedure
Step 1 Press pound (#), and enter your activation code in the field that is provided on the Welcome screen.
Step 2
Press Continue.
The phone completes the provisioning process automatically.
Step 3 If an error message displays, enter the code again or contact your administrator.
Install the Wired Expansion Microphones
The phone supports an optional kit with two wired expansion microphones. You can extend the microphones
up to 7 feet (2.13m) from the phone. For best results, place the microphones between 3 feet (0.91 m) and 7
feet (2.1 m) away from the phone.
Procedure
Step 1 Plug the end of the microphone cable into the port on the side of the phone.
Your Phone
10
a. Select Status > Issues. If the phone has no user password that is created, you see a message No user
password provided and you see the Select softkey which lets you access the No user password
provided screen.
If the phone has user password, the value of the Issues menu is displayed as None.
b. Press Create.
Your Phone