Makita AC001G Instruction Manual page 9

Glossary
MPa (megapascal):
Cut-in pressure:
the motor will restart automatically re-started is called
Cut-out pressure:
On-receipt inspection
Installation and break-in procedures
Location of the air compressor
cooling.
installation.
WARNING:
Risk of Falling
WHAT CAN HAPPEN
HOW TO PREVENT IT
high locations.
Operating temperature
between 0°C and 40°C.
CAUTION:
Never operate the compressor in
the temperatures below 0°C and above 40°C.
-
Duty cycle
-
Piping
Battery protection system
conditions:
Overloaded
causes it to draw an abnormally high current. In this
-
Low battery voltage
remove and recharge the battery cartridge.
Protections against other causes
-
to restart.
recharged battery.
system, then contact your local Makita Service Center.
9 ENGLISH
-
-
-
-
-