Maintenance Routine - Makita AC001G Instruction Manual

NOTICE:
Risk of Property Damage
Always drain water from the air tank. The water
may contain oil and rust which can cause stains.
NOTE:
sure. The valve can then be removed, cleaned, then
reinstalled.
NOTE:
condensate contains lubricating oil and/or substances
which may be regulated. Follow the regulations in
6.
WARNING:
Drain Air Tank Properly. Improper
draining of the air tank can result in corrosion and
possible bursting of the tank. Tank bursting could
lead to personal injury and property damage.
MAINTENANCE
WARNING:
Never use the air compressor
which is operating abnormally.
If the air compressor appears to be operating
unusually, making strange noises or vibration,
stop using it immediately and arrange for repairs
by a Makita authorized service center.
WARNING:
Use only genuine Makita replace-
ment parts.
Replacement parts not manufactured by Makita
may void your warranty and can lead to malfunc-
tion and result in injuries. Genuine Makita parts
are available from an authorized dealer.
WARNING:
UNIT CYCLES AUTOMATICALLY
WHEN POWER IS ON. WHEN DOING
MAINTENANCE, YOU MAY BE EXPOSED TO
VOLTAGE SOURCES, COMPRESSED AIR
OR MOVING PARTS. PERSONAL INJURIES
CAN OCCUR. BEFORE PERFORMING ANY
MAINTENANCE OR REPAIR, THE TOOL IS
SWITCHED OFF AND THE BATTERY CARTRIDGE
IS REMOVED AND BLEED OFF ALL AIR
PRESSURE.
CAUTION:
Always be sure that the tool is
before attempting to perform inspection or
maintenance.
NOTICE:
Never use gasoline, benzine, thinner,
alcohol or the like. Discoloration, deformation or
cracks may result.
-

Maintenance routine

1.
2.
3.
4.
damaged or worn out.
5.
WARNING:
properly tightened. If screws plates or covers
become loose personal injury or property damage
may occur.
12 ENGLISH
Keep all screws, bolts and covers
-
-
-