Declaration Of Conformity; Important Safety Instructions - Makita AC001G Instruction Manual

to EU Outdoor Noise Directive.
to UKCA Outdoor Noise Directive.
NSW Noise Control Regulation.
Noise
ing to EN ISO 3744: 2010:
) : 68 dB (A)
Uncertainty (K) : 2.5 dB (A)
The noise level under working may exceed 80 dB (A).
NOTE: The declared noise emission value(s) has
been measured in accordance with a standard test
another.
NOTE: The declared noise emission value(s)
WARNING:
Wear ear protection.
WARNING:
The noise emission during actual
value(s) depending on the ways in which the
tool is used especially what kind of workpiece is
processed.
WARNING:
Be sure to identify safety mea-
sures to protect the operator that are based on an
estimation of exposure in the actual conditions of
use (taking account of all parts of the operating
cycle such as the times when the tool is switched
trigger time).

Declaration of Conformity

For European countries only
this instruction manual.
IMPORTANT SAFETY
INSTRUCTIONS
SAVE THESE
INSTRUCTIONS.
WARNING:
IMPROPER OPERATION OR MAINTENANCE
OF THIS PRODUCT COULD RESULT IN
SERIOUS INJURY AND PROPERTY DAMAGE.
READ AND UNDERSTAND ALL WARNINGS
AND OPERATING INSTRUCTIONS BEFORE
USING THIS EQUIPMENT.
Keep this instruction manual for your refer-
ence and instructions for others. When you
lend the compressor and air tools, lend only
to people who have proven to be experienced
and also hand over the instruction manual
together.
First-time or inexperienced operators should
be trained in the operations. Never allow
children, or people unfamiliar with the instruc-
tions, to use the compressor and air tools.
-
WARNING:
Work Area Safety
Keep your work area clean and well lit.
Cluttered and dark areas invite accidents.
Do not operate the compressor in explosive
mable liquids, gases, or dust. The compressor
creates sparks which may ignite the dust or
fumes.
Keep bystanders, children, and visitors away
while operating an air tool. Distractions can
cause you to lose control. Protect others in
the work area from debris such as chips and
sparks. Provide barriers or shields as needed.
Children should never be allowed in the work
area.
The adequate room temperature is +5°C to
+30°C. (0°C to + 40°C at Maximum)
WARNING:
Risk of Unsafe Operation
WHAT CAN HAPPEN
HOW TO PREVENT IT
ings in this manual.
obstacles.
times.
times. Distractions can cause you to lose control.
4 ENGLISH
-
-