Download
Share
Print this page
Makita AC310H Technical Information
  1. Manuals
  2. Brands
  3. Makita Manuals
  4. Air Compressor
  5. AC310H
  6. Technical information

Makita AC310H Technical Information

Hide thumbs Also See for AC310H:
1
2
3
4
5
6
7

Advertisement

Quick Links

Download this manual See also: Instruction Manual
T
ECHNICAL INFORMATION
Models No.
Description
C
ONCEPT AND MAIN APPLICATIONS
This model has been launched as Makita first HP(high pressure) air compressor.
1,500W high output motor generates maximum 2.58MPa air flow performance to
exploit the full potential of HP pneumatic tools such as nailer, stapler, screwdriver
and impact driver.
Four couplers are on the front. The two couplers are for HP pneumatic tools,
the others are for RP (regular pressure) pneumatic tools.
Guard with seven bumpers is equipped to protect their couplers and body.
S
pecification
Voltage (V)
120
220-240
Specifications
Max air pressure in Tank: Mpa (psi)
Air pressure in Tank when restarting: Mpa (psi)
Air pressure
through Coupler: Mpa
Operating air pressure: MPa (psi)
Air flow performance: L/min at 0.75MPa
Horsepower: HP
Type
Motor
RPM: min
Rated amperage for North America: A
Continuous rating output: W
Noise: dB(A)
tested according to outdoor noise directive
Motor thermal overload protector
Insulation
Tank capacity
Power supply cord: m (ft)
Weight according to EPTA procedure: kg (lbs)
S
tandard equipment
None of Standard equipment
Note: Standard equipment may vary by countries.
O
ptional accessories
Carrying tool
Air hose assembly
Hose reel
AC310H
Air Compressor
Current (A)
Cycle (Hz)
13.0
7.0
Model No.
for high pressure
for regular pressure
-1
Continuous Rating (W)
Input
60
---
50
1,800
AC310H
2.8 (410)
2.3 (330)
0 ~ 2.58
0 ~ 0.91
0.98~2.26 (140 ~ 320)
90
2.5
4-pole induction motor
1,700(60Hz) / 1,420(50Hz)
13
1,500
90
Yes
by grounding
6.2 (1.6)
1.8 (5.9)
36 (79.4)
PRODUCT
W
Dimensions: mm (")
Length (L)
476 (18-3/4)
Width (W)
507 (20)
Height (H)
375 (14-3/4)
Max. Output (W)
Output
875
1,500
875
1,500
P 1/ 7
H
L

Advertisement

loading

Related Manuals for Makita AC310H

Summary of Contents for Makita AC310H

  • Page 1 Air Compressor ONCEPT AND MAIN APPLICATIONS This model has been launched as Makita first HP(high pressure) air compressor. 1,500W high output motor generates maximum 2.58MPa air flow performance to exploit the full potential of HP pneumatic tools such as nailer, stapler, screwdriver and impact driver.

  • Page 2: Necessary Repairing Tools

    P 2/ 7 epair CAUTION: Repair the machine in accordance with “Instruction manual” or “Safety instructions”. [1] NECESSARY REPAIRING TOOLS Code No. Description Use for 1R230 1/4" Hex. shank bit for M6 Removing M6 Hex socket head bolt 1R231 1/4" Hex. shank bit for M8 Removing M8 Hex socket head bolt [2] REPLACING [2]-1.
  • Page 3 P 3/ 7 epair [2] REPLACING [2]-3. Unloading valve 1) Loosen M8 Ring nut with Spanner 17, then remove Pipe 8 from Elbow 8-R1/4. (Fig. 6) Fig. 6 Pipe 8 Elbow 8-R1/4 M8 Ring nut 2) Loosen four M5x10 Pan head screws, then remove Front panel assembly from Frame complete. (Fig. 7) Fig.
  • Page 4 P 4/ 7 epair [2] REPLACING [2]-4. Sheet ring H, Leaf spring H, Wearing H DISASSEMBLING 1) After removing Side panel with Side panel cover, loosen two Ring nut 10 and remove Pipe 10. (Fig. 9) Fig. 9 Pipe 10 Ring nut 10 (2pcs.) 2) Loosen nine 4x18 Tapping screws, then separate Motor cover A complete from Motor cover C.
  • Page 5 P 5/ 7 epair [2] REPLACING [2]-4. Sheet ring H, Leaf spring H, Wearing H (cont.) DISASSEMBLING 4) Loosen two Ring nuts 8 with Spanner 17, then remove Pipe 8 from two Elbows 8-R1/4. (Fig. 12) Fig. 12 Elbow 8-R1/4 (2pcs.) Pipe 8 Ring nut 8 (2pcs.) 5) Loosen four M8x70 Hex socket head bolts with Hex wrench 9, then remove Cylinder H section from Crank case.
  • Page 6 P 6/ 7 epair [2] REPLACING [2]-4. Sheet ring H, Leaf spring H, Wearing H (cont.) ASSEMBLING 1) Assemble Wearing H to Piston H. Wear ring H is not directional in assembling. 2) Insert Ring spring H in Sheet ring H so that the clearance of Ring spring H faces the opposite side against the clearance of Sheet ring H.
  • Page 7 P 7/ 7 iring diaphragm Note: Fix Lead wires in Motor cover with Band Overhead view of Switch assembly so as not to sag and interfere with Fan 195. White or blue Black or brown Green Three lead wires from Motor section Black White or blue White...