Table Of Contents; Specifications - Makita LS1219L Instruction Manual

ENGLISH (Original instructions)
Contents
SPECIFICATIONS ....................................................................................................................................................... 2
General Power Tool Safety Warnings .......................................................................................................................... 3
MITER SAW SAFETY WARNINGS ............................................................................................................................. 4
INSTALLATION............................................................................................................................................................ 6
FUNCTIONAL DESCRIPTION..................................................................................................................................... 6
ASSEMBLY ............................................................................................................................................................... 11
OPERATION.............................................................................................................................................................. 14
MAINTENANCE ........................................................................................................................................................ 19
OPTIONAL ACCESSORIES ...................................................................................................................................... 21

SPECIFICATIONS

Model
Blade diameter
Blade body thickness
Hole diameter
For all countries other than European countries
For European countries
Max. Cutting capacities (H x W) with 260 mm in diameter
Miter angle
0°
45°
60° (right)
-1
No load speed (min )
Laser Type (LS1018L only)
Dimensions (L x W x H)
Net weight
Safety class
• Due to our continuing program of research and development, the specifications herein are subject to change without notice.
• Specifications may differ from country to country.
• Weight according to EPTA-Procedure 01/2003
Symbols
The following show the symbols used for the equipment.
Be sure that you understand their meaning before use.
･
Read instruction manual.
･
DOUBLE INSULATION
･
To avoid injury from flying debris, keep
holding the saw head down, after
making cuts, until the blade has come to
a complete stop.
･
When performing slide cut, first pull
carriage fully and press down handle, then
push carriage toward the guide fence.
45° (left)
50 mm x 310 mm
50 mm x 220 mm
-
END222-4
2
Bevel angle
0°
91 mm x 310 mm
91 mm x 220 mm
91 mm x 153 mm
Red Laser 650 nm,
For all countries other than European countries.........19.8 kg
For European countries..............................................19.9 kg
･
Do not place hand or fingers close to the
blade.
･
Adjust sliding fences clear of blade and
blade guard properly.
･
Always remove SUB-FENCE R when
performing right bevel cuts. Failure to do so
may cause serious injury to operator.
･
LASER RADIATION: Do not stare into beam.
Direct laser beam may injure your eyes.
･
Only for EU countries
Do not dispose of electric equipment
together with household waste material!
In observance of the European Directive, on
Waste Electric and Electronic Equipment
and its implementation in accordance with
national law, electric equipment that have
reached the end of their life must be
LS1018 / LS1018L
255 mm - 260 mm
1.6 mm - 2.4 mm
25.4 mm
30 mm
45° (right)
31 mm x 310 mm
31 mm x 220 mm
-
4,300
1mW ( Laser Class 2 )
825 mm x 536 mm x 633 mm
/II