Sharing Contents - Cisco TelePresence System Codec C-Series User Manual

Hide thumbs Also See for TelePresence System Codec C-Series:
Table of Contents

Advertisement

Cisco TelePresence System Profile-series, C-series codecs, Quick Set C20
Contents
Getting started

Sharing contents

General recommendations tips for making your video meeting room as good as
possible are described in the Administrator guide for this product. The Administrator
guide may be downloaded from www.cisco.com/go/telepresence/docs.
Dual video stream
With dual video stream you can view two different live video streams simultaneously—
the main video and one additional source. This could for example be both a PC
presentation and the person who gives the presentation.
If a video system does not support dual video stream, no second video stream will be
established for this system and the PC presentation will be shown as the main video.
D14852.03
User guide Cisco TelePresence Profile, C-series codecs, Quick Set C20, February 2012
All contents are copyright © 2010–2012 Cisco Systems, Inc. All rights reserved.
Making calls
Phone book usage
37
In-call features
In-call features
Sharing PC contents
Make sure the PC does not cover your line of sight to any of the microphones.
This will reduce the perceived audio quality at the far end.
Locate the DVI cable and connect the PC to the video system.
Connect the audio mini-jack output from the PC, or any other
source—including Ipod—to the mini-jack socket of the cable to
get sound. Connect the RCA connectors to the corresponding
sockets on the codec/endpoint.
The default presentation source will be activated when you press
the Presentation button (
) on the remote control, as outlined.
The DVI / VGA input is compliant with VESA Extended Display
Identification Data (EDID) and will be able to notify the PC of the
supported output formats.
If the shared contents fail to show
Normally you must press a special key combination to switch the PC image from the PC
screen to the video screen.
Check that the presentation source is correctly defined. Access to this setting may be
password protected by your system administrator. The procedure is described in the
Administrator guide for this product.
Make sure your PC is set to activate your VGA output.
Selecting the source
To specify which source to serve as presentation source select it as shown here. Note that
the name of each source can be changed, consult your administrator for details on this. All
options shown are not available to all systems.
HOME
Call
Meetings
Presentation
Camera control
Settings
User guide
Scheduled meetings
Advanced settings
HOME
PRESENTATION
Call
Secondary camera (no signal)
Meetings
PC
Presentation
DVD
Camera control
Document camera
No presentation
Settings
www.cisco.com

Advertisement

Table of Contents
loading

Table of Contents