Breville BOV820 Instruction Book page 27

POSSIBLE PROBLEM
The 'preheat' alert sounds at a
lower temperature than what is
displayed on the LCD screen.
The LCD screen displays 'E01'.
The LCD screen displays 'E02'.
The LCD screen displays 'E03'.
The LCD screen displays 'E04'.
The LCD screen displays 'E05'.
EASY SOLUTION
•
The 'preheat' alert sounds at 75% of the target temperature.
This provides the fastest, combined preheating and cooking time.
•
This is because when the 'preheating' alert sounds, signalling the user
to open the oven door and insert food, there is dramatic temperature
loss inside the oven. If the alert sounded at 100% of the target
temperature, opening the door would mean a lot of this waiting time
is "wasted". We have calculated that by sounding the alert at 75% of the
target temperature, followed by the oven door being opened to place
food inside the oven, that we still recover to the target temperature up
to 2 minutes faster. This is why the temperature on the LCD screen
does not match the target temperature at the 'preheat' alert. In total,
it takes the oven approximately 8–10 minutes from start-up, including
opening the oven door when the 'preheat' alert sounds, to reach the
target temperature. To ensure the fastest heat up time, the Breville
oven uses the maximum allowable power from the outlet (1500W
for baking, 2400W for toasting).
•
The LCD screen will display 'E01' when there is a non-resettable issue
with the appliance. Should this occur, immediately remove the power
cord from the power outlet and call Breville
•
The LCD screen will display 'E02' when there is a non-resettable issue
with the appliance. Should this occur, immediately remove the power
cord from the power outlet and call Breville
•
The LCD screen will display 'E03' if the oven temperature is above
the set maximum limit. Remove the plug from the power outlet,
allow the oven to cool for 15 minutes, then plug back in.
•
Call Breville Customer Service if the 'E03' message continues.
®
•
The LCD screen will display 'E04' if the room temperature is below
the set minimum. Unplug the oven and relocate to a warmer area.
•
The LCD screen will display 'E05' when there is a non-resettable issue
with the appliance. Should this occur, immediately remove the power
cord from the power outlet and call Breville
®
Customer Service.
®
Customer Service.
®
Customer Service.
®
27