Crumpet Function - Breville BOV820 Instruction Book

CRUMPET FUNCTION

The CRUMPET function crisps the top of your
crumpet while only lightly toasting the base.
This function is also ideal for toasting bagels or
thick sliced specialty breads which require one
side to be toasted more than the other.
1. Insert the wire rack, with the spokes
facing upward, into the middle rack height
position.
2. If toasting 1–3 crumpets, centre on
the wire rack. If toasting 4–6 crumpets,
evenly space them with 2–3 crumpets
at the front of the wire rack and
2–3 crumpets at the back of the rack.
NOTE
The top of the crumpet must always face
upwards towards the top heating elements.
This allows the top to get crisp while the base
is only lightly toasted.
3. Close the oven door.
4. Turn the FUNCTION dial until the
indicator on the LCD screen reaches the
CRUMPET function. The top figure on the
LCD screen indicates the preset darkness
setting '4', while the bottom figure indicates
the preset number of crumpets '4'.
NOTE
If you like your crumpets equally crisp on both
the top and bottom, we recommend using the
TOAST function.
5. The darkness setting and number of
crumpets can be adjusted before or during
the toasting cycle.
a) The darkness setting is indicated by the row
of triangles at the top of the LCD screen.
Turn the TEMPERATURE dial to the left to
reduce the darkness setting, or to the right
to increase it. The circle below the triangles
will move according to the selected setting.
As a general guide:
DESIRED CRUMPET COLOUR
Light
Medium
Dark
b) The number of crumpets is displayed as the
bottom figure on the LCD screen. Turn the
TIME dial to the left to reduce the number
of crumpets, or to the right to increase it.
The number of crumpets ranges from
'1' to '6'.
6. Press the START/CANCEL button to
start the CRUMPET function. The button
backlight will illuminate red, the oven
alert will sound, and the LCD screen will
illuminate orange.
7. The timer will be displayed and
automatically begin to count down.
The time can be adjusted during the
crumpet cycle by turning the TIME dial.
The cycle can be stopped at any time by
pressing the START/CANCEL button.
PRESS
8. At the end of the CRUMPET cycle, the oven
alert will sound. The START/CANCEL
button backlight will go out and the LCD
screen will illuminate blue.
SETTING
1 or 2
3, 4 or 5
6 or 7
15