Cisco TelePresence SX20 Reference Manual page 2

Cisco TelePresence SX20/SX80 Reference Guide
Ensure that the power cable is
1
plugged into the power outlet in
the wall.
Confirm that the network cable
2
is plugged into the network outlet
in the wall. The network cable
must be plugged into a dedicated
OTN network outlet.
3
Verify that the power bar is
turned on. The power bar
supplies the whole system, and
you can turn off your system here
at the end of your session.
4
Ensure that the monitor is on.
5
Check that the codec/camera
is on by checking the LED light at
the front of the codec.
6
Pick up the remote control and
unmute your videoconferencing
sound by pressing the "Mic Off"
button on the remote control.
7
Turn the Self view on by
navigating to the camera icon
using the remote control arrows
and selecting the thumbtack icon.
March 2023 | pg. 2