Honeywell Fire-Lite Alarms ES-200X User Manual page 20

Whitney Even on 06/22/2022
Outdoor Selectable-
Output Horns, Strobes,
and Horn Strobes
SpectrAlert Advance outdoor selectable-output horns,
®
strobes, and horn strobes are rich with features that
cut installation times and maximize profits.
Features
• Automatic selection of 12- or 24-volt operation at 15 and 15/75
candela
• Field-selectable candela settings on wall and ceiling units: 15, 15/75,
30, 75, 95, 110, 115, 135, 150, 177, and 185
• Plug-in design with minimal intrusion into the back box
• Tamper-resistant construction
• Universal mounting plate for wall- and ceiling-mount units
• Mounting plate shorting spring tests wiring continuity before
devices are installed
• Weatherproof per NEMA 4X, IP56
• Listed to UL 1638 (strobe) and UL 464 (horn)
• Rated from –40°F to 151°F
• Horn rated at 88+ dBA at 16 volts
• Rotary switch for horn tone and three volume selections
• Compatible with System Sensor synchronization protocol and
legacy SpectrAlert products
Agency Listings
S4011 (chimes, horn strobes, horns)
S3593 (outdoor and alert strobes)
7300-1653:187 (outdoor strobes)
7125-1653:188 (horn strobes,
3023572 MEA452-05-E 7135-1653:189 (horns, chimes)
The SpectrAlert Advance series offers the broadest line of
outdoor horns, strobes, and horn strobes in the industry. With
white and red plastic housings, wall and ceiling mounting options,
and plain and FIRE-printed devices, SpectrAlert Advance can meet
virtually any application requirement.
SpectrAlert Advance outdoor horns, strobes, and horn strobes can
be used indoors or outdoors in wet or dry applications, and can
provide reliable operation from −40°F to 151°F.
Like the entire SpectrAlert Advance product line, these devices
include a variety of features that increase their application versatility
while simplifying installation. All devices feature plug-in designs with
minimal intrusion into the back box, which make installations fast
and foolproof while virtually eliminating costly and time-consuming
ground faults.
All horns, strobes, and horn strobes use a universal mounting plate
with an onboard shorting spring that tests wiring continuity before
the device is installed, protecting devices from damage. In addition,
field-selectable candela settings, automatic selection of 12- or 24-
volt operation, and a rotary switch for horn tones with three volume
selections enables installers to easily adapt devices to suit a wide
range of application requirements.
chime strobes)