Troubleshooting; Outline Of Troubleshooting - Hitachi SL1 Maintenance Manual

8. Troubleshooting

8.1 Outline of Troubleshooting

Is power supply operating normally ?
Operator Call
[Section 8.1.1]
8.1.1 Operator Call
Message LED is lit, and applicable messages appear on the liquid crystal
display (LCD) in the following cases:
(1). Consumables to be replenished.
(2). Waste toner pack being full of waste toner.
(3). Paper jam
(4). Periodic maintenance.
(5). Maintenance work being incomplete.
(6). In case that operator call is not cleared.
Usually the above cases are not regarded as a breakdown, but treated in
accordance with Table 8-1.
If the operator call is still indicated after the treatment, breakdown is
occurring. Check the printer in accordance with (6). In case that operator
call is not cleared.
Printer in trouble
Reset the power after once turning off the main switch
[Normally Operating]
Paper Transport Error
[Section 8.1.2]
8-1
[Trouble Repeat]
Check power cord and cable
Printer Error
[Section 8.2]
Imaging Failure
[Section 8.3]