Registration Clutch - Hitachi SL1 Maintenance Manual

7.4.2 Registration Clutch (RECL)
Tools
1
. Phillips Screwdriver #1, #2
2
. Slotted Screwdriver #1
Disassembly Procedures
1
. Remove the side cover (R).
(See the item 7.1.3.)
2
. Remove all the connector of
registration clutch connected
with IOD2 P.W.B.
3
. Remove the C ring from the
shaft.
4
. Pull out the registration
clutch from the shaft.
Assembly Procedures
1
. Install a new registration clutch
to the shaft.
2
. Install the C ring to the shaft's
groove, and fix the registration
clutch.
3
. Connect the connector with the
IOD2 P.W.B.
4
. After the above , follow exactly
the reverse order of
disassembling procedures.
Precautions
7-38
Registration
Clutch
C ring
Fig.7-30