Language Registration - Hitachi PXR Service Manual

2.12 Language registration

-This function is to register screen languages.
(Only English is registered when shipped.)
- Register the languages to the IJP from the memory card.
- If the customer is using password to protect the functions for maintenance work,
release the protection on functions and after setting this function is finished, reset the
protection on functions.
1 Turn on the power.
2 Insert the memory card (with IJP system data) into the slot.
Caution:
- Be sure to use the system data memory card stored the latest version software.
3 Press Select language.
In case that the languages in the memory card are not displayed on the screen, put it into
the Service pesonnel maintenance mode by using Password protection.
Select language
Current language : English
Registered language
Language1 : English
Language2 : French
Language in the memory card
English
Input mode [ 1
Press <OK> to change the language of screen.
2011.07.07 12:45
01. 00
01. 00
01. 00
01. 00
] (1:Special char. 2:Kana, Dedicated char.)
2-31
Status:XXXXXXXXX
Prev.
Lan-
guage
Next
Lan-
guage
Decre-
ment
Incre-
ment
OK
Save
Back