Print Data Registration Transmission; Text; Message Name - Hitachi UX2 User Manual

1.3.4 Print data registration transmission

1.3.4-1 Text

● Specifies message number
ESC2 Header 21H Classification 31H
●
Specifies registration No. and message name.
ESC2 Header 21H Classification 31H
ESC2 Header 21H Classification 32H

1.3.4-2 Message name

(1) Message number specified
●A message name is automatically attached when print data is registered.
● Based on the message name displayed in the upper left hand corner of the screen,
the last 4 digits are replaced with the message number and used as the new message name.
(Example) Registering for No. 123
Contents displayed in upper left hand corner of the screen: "ABCDEFGHIJKL"
Message name after registration
(2) Message number and message name specified
●The specified message name attached when print data is registered.
(3) Same message name is used for other message number
●I
f a message name is in use for other message number, new message name will be created by
using original message name as a base and replacing its 7th and 8th digits with AA~ZZ.
(Example) Message name [ABC] is already registered on No.1. Register on No.2 using identical
message name.
Message name of No.1: [ABC]
Message name of No.2: [ABC
(4) Characters available for message name
●Characters used for setting the message name transmission are different from characters used in manual
input on registration screen.
Function
Manual input
Message name transmission
1000s place
Print data message number (0001 to 2000)
1000s place
Print data message number (0001 to 2000)
Message name (1 to 12 digits)
Message name: ASCII code (20H to 5FH, 61H to 7AH)
AA]
Alphameric character/Symbols
Available
Available
Numbers/symbols (ASCII code): 20H to 5FH, 61H to 7AH
14
100s place 10s place
100s place 10s place
: "ABCDEFG 0123"
Accent character/
Arabic character
Available
Unavailable
Unit
place
Unit
(Contd.)
place