Parts Description; Functional Description; Charging The Battery - Makita DEABL1055B Instruction Manual

PARTS DESCRIPTION

This battery can be used for following Makita products.
► Fig.1
Group Product name
A Fan jacket
Fan vest
Heated jacket
Heated vest
Heated blanket
B Fan jacket
Fan vest
Heated base layer
shirt
1. Power level indicator
When using a fan jacket/vest, the power level is
displayed.
NOTE: If you use the fan jackets/vests in group A
listed above, the power level indicator 4 will not lights
up because their fan units employ 3-step control.
NOTE: If you use the heated clothing, only the power
level indicator 4 will lights up.
2. Battery capacity indicator
The level of remaining battery capacity is displayed.
3. Power button
To turn on, press and hold the power button until the
power level indicator lights up.
To change the power level of the fan jacket/vest, press
the power button briefly when the power is turned on.
To turn off, press and hold the power button until the
power level indicator turns off.
NOTE: To change the warmth of the heated clothing,
press the button on the heated clothing when it is
powered.
4. USB port (with cover)
The USB port is used for charging the battery and also
used as a power supply output for your USB device.
5. Power socket
Connect the cable from the products or the adapter
cable to supply power.
6. Adapter cable for fan jacket/vest (optional
accessory)
Use adapter cable when using the fan jacket/vest in
group A listed above.
7. Adapter cable for heated clothing (optional
accessory)
Use adapter cable when using the heated clothing in
group A listed above.
Model
DFJ206 / DFJ207 / DFJ210 /
DFJ211 / DFJ212 / DFJ213 /
DFJ214 / DFJ216 / DFJ304 /
DFJ305 / DFJ310 / DFJ311 /
DFJ405 / DFJ407 / DFJ410 /
DFJ411 / DFJ416
DFV210
CJ105D / CJ106D /
DCJ205 / DCJ206
CV102D / DCV202
CB100D / DCB200
DFJ212A / DFJ213A /
DFJ214A / DFJ216A /
DFJ312A / DFJ416A
DFV210A / DFV214A /
DFV215A
DCX200 / DCX201
8. Socket of the products
Connect the suitable adapter cable for the fan jacket/
vest or heated clothing. The shape and location of the
socket vary depending on your products.
9. USB cable
Use the USB cable for charging the battery.
FUNCTIONAL
DESCRIPTION

Charging the battery

CAUTION:
When charging, plug the USB con-
nector securely to the battery. Loose connection
may cause risk of smoke, fire and personal injury.
CAUTION:
During charging, do not connect
any appliances to the power socket of the battery.
CAUTION:
Always disconnect the USB cable
from the battery after charging.
NOTICE:
Be sure to charge the battery before
using it for the first time. Factory shipped battery is
not charged sufficiently and battery protection system
may work if used without charging.
NOTICE:
When the AC power adapter is con-
nected to the battery, the tool or machine does
not start. In this case, remove the AC power
adapter from the battery.
Open the cover on the USB port. Connect the battery
and AC Power Adapter ADP07 (not included) or other
general USB charger using the USB cable supplied with
the battery. The recommended output spec for general
USB charger is 5 V / 2.4 A or lower. After that, plug
the AC Power Adapter ADP07 to the mains. When the
charging is finished, all battery capacity indicator will
light up and then turns off after a certain period. Unplug
the AC Power Adapter and disconnect the USB cable,
and then close the cover.
► Fig.2: 1. AC Power Adapter ADP07 2. Battery
BL1055B 3. Cover 4. USB cable
5 ENGLISH