Makita UR013G Instruction Manual page 19

1. Put on the shoulder harness and fasten the
buckle.
Fig.30
2.
Clasp the hook on the shoulder harness to tool's
hanger.
1
Fig.31
► 1 . Hook 2. Hanger
3. Adjust the shoulder harness to a comfortable
working position.
Fig.32
2
The shoulder harness features a means of quick
release. Simply squeeze the sides of the buckle while
holding the tool to release the tool from the shoulder
harness.
1
Fig.33
► 1 . Buckle
Adjusting the hanger position
For more comfortable handling of the tool, you can
change the hanger position.
1.
Loosen the hex socket head bolt on the hanger,
and slide the hanger to a comfortable working position.
1
Fig.34
► 1 . Hanger 2. Hex socket head bolt
2. Adjust the hanger position as shown in the figure
and then tighten the hex socket head bolt.
750 mm
1
Fig.35
1 The hanger position from the ground
2 The cutting tool position from the ground
3 The horizontal distance between the hanger
and the unguarded part of the cutting tool
19 ENGLISH
2
2
100-300 mm
750 mm
3