Creating zoning plan
A temperature zone is an area of the building, e.g. a room, in which
the setpoint temperature* is set with a setpoint adjuster. The storey
controller controls all thermal actuators of a temperature zone
identically.
5 temperature zones can be set up for each storey controller.
3 actuators can be connected in each of 3 zones, and 2 actuators can
be connected in each of the remaining 2 zones.
The total number of actuators which can be controlled by a signal
storey controller is limited to 10.
Determining temperature zones
Damage caused by equipment from other manu-
facturers!
The storey controller was designed for use with
Caution!
components from Honeywell only!
Use only H 200 AG (normally closed) or H 200 AO
►
(normally open)-type actuators.
Group actuators (by type and location) which are controlled with the
►
storey controller.
Group together all actuators which are controlled by a setpoint
►
adjuster in a temperature zone.
Creating zoning plan
5