Description
Button functions
Press the configuration
►
button (1) briefly.
Press the configuration
►
button (1) briefly once
more.
Press the delete
►
button (2).
18
The
assignment
of
the
controller to the central operating
device, setpoint adjusters and room
temperature sensors is displayed.
The storey controller shows up in the
device display.
The green LED
illuminates if a
temperature zone is assigned to the
central operating device.
The red LED
illuminates if an RF
20, HCU 23 or HCW 23 is connected.
The display returns to normal mode
after 60 seconds.
The red LED
of temperature zone 1
flashes.
Installation mode is active.
The selected temperature zone is
removed (the LED flashes).
storey