Transition Control Block - Sony MLS-X1 User Manual

Transition Control Block

The transition control block is used to execute transitions.
It supports common transitions and independent key
transitions.
AUTO TRANS button
a Transition execution section
Name Description
Fader lever Move this up or down to execute a
transition.
Transition Displays the transition progress using
indicator LEDs.
[AUTO TRANS] Executes an auto transition with the set
button transition rate and transition type.
During the transition, the button is lit
amber.
[CUT] button Executes an immediate transition.
b Transition settings section (assignable buttons)
You can assign functions, such as selections and settings,
for transitions in the Home > Setup > Panel > Module >
Button Assign menu (19104.21).
For details about assigning buttons, see "Assigning
Control Panel Buttons" (page 402).
Transition indicator
b
a
CUT button
For details, see "Chapter 5 Transitions" (page 94).
Fader lever
a
Next transition selection buttons
Function Button name
name
Background BKGD
Key 1 to Key 8 KEY1 to KEY8 Inserts or removes the
Key Priority KEY PRIOR
All ALL
Priority Set PRIOR SET
50
d
c
Description
Switches the background
for a next transition.
selected key for a next
transition.
The key is inserted if a key
is currently not inserted,
or removes the key if a
key is currently inserted.
Changes the key priority
for a next transition.
When the [PRIOR SET]
button is lit, the setting for
key priority after the
transition is used.
Selects multiple next
transitions simultaneously.
Sets the key priority.