Aux Bus Control Block - Sony MLS-X1 User Manual

Bank selection buttons
Function name Button name
Bank 1 to Bank BANK1 to
20 BANK20

AUX Bus Control Block

The AUX bus control block is used for selecting signals
used on buses, for router operations, and other tasks.
1st row
2nd row
b
c
3rd row
4th row
a Button rows
The 1st row and 2nd row are used as delegation button
rows, and the 3rd row and 4th row are used as cross-point
button rows.
AUX bus operation mode
Uses the 1st row and 2nd row delegation buttons to select
buses, and the 3rd row and 4th row cross-point buttons to
select signals.
For details, see "Chapter 4 Selecting Signals"
(page 81).
Description
Switches the memory
recall section to
function recall mode
of the selected bank.
a
a
42
b Memory recall section (memory recall buttons)
This section displays the functions assigned to the buttons
for the selected operation mode.
Note
When using two utility/shotbox control blocks, the
memory recall button settings are common to both.
The AUX bus control block has two modes: AUX bus
operation mode and router operation mode. To switch to
router operation mode, press the [RTR MODE] button,
turning it on, in the cross-point pad.
d
Name Description
1st row • When second delegation mode is enabled,
selects the bus to assign to the 3rd row.
• When second delegation mode is disabled,
selects the bus (bus in unshifted state of
delegation buttons) to assign to the 3rd row
and 4th row.
You can select the bus in the shifted state
while pressing the shift button.
2nd row • When second delegation mode is enabled,
selects the bus to assign to the 4th row.
• When second delegation mode is disabled,
selects the bus (bus in shifted state of
delegation buttons) to assign to the 3rd row
and 4th row.