Flexi Pad Control Block - Sony MLS-X1 User Manual

For details about the content name display of keys, see
"Setting Logical V/K Pair Names/Source Names and

Flexi Pad Control Block

The Flexi Pad control block is used for recalling and
saving snapshots, wipe snapshots, DME wipe snapshots,
and key snapshots, for recalling and creating macros, for
recalling shotboxes, for entering the transition rate, and
for other tasks.
a
a Mode selection buttons / operation buttons / bank
selection buttons (assignable buttons)
You can assign mode/bank selection buttons and
operation buttons in the Home > Setup > Panel > Module
> Button Assign menu (19104.21).
For details about assigning buttons, see "Assigning
Control Panel Buttons" (page 402).
Mode selection buttons
Function Button Description
name name
Key KEY Switches to key operation mode.
In key operation mode, you can
carry out the following
operations.
• Saving and recalling key
• Selecting independent key
• Selecting the key fill signal or
b
snapshots
transition type
key source signal in the cross-
point control block
Destination Names" (page 416) and "Setting a Logical
V/K Pair" (page 381).
Function Button
name name
Wipe WIPE
DME Wipe DME
WIPE
Snapshot SNAPSHOT Switches to snapshot operation
Shotbox SHOTBOX Switches to shotbox operation
Macro MCRO
Transition TRANS
Rate RATE
[UNDO] button / [DEL] button
Function Button
name name
Undo UNDO
Delete DEL
Notes
• The [UNDO] button and [DEL] button cannot be used
in shotbox operation mode.
30
Description
Switches to wipe snapshot
operation mode.
In wipe snapshot operation
mode, you can save and recall a
wipe snapshot and select a wipe
pattern.
Switches to DME wipe snapshot
operation mode.
In DME wipe snapshot operation
mode, you can save and recall a
DME wipe snapshot and select a
DME wipe pattern.
mode.
In snapshot operation mode, you
can save and recall snapshots,
and add attributes.
mode.
In shotbox operation mode, you
can recall and execute
shotboxes.
Switches to macro operation
mode.
In macro operation mode, press
and hold the [MCRO] button and
press a button (for the target
register) in the memory recall
section to enter edit mode.
In macro operation mode, you
can save, recall, and edit macros.
Switches to transition rate
operation mode.
In transition rate operation mode,
you can enter a transition rate.
Description
After recalling a register, returns
to the state before the register
was recalled.
Press and hold the [DEL] button
and press a register button in the
memory recall section to delete
the register data.