Location And Function Of Parts; Bkpf-101A Connector Panel; Bkpf-101Cb Connector Panel - Sony BKPF-101A Operation Manual

Location and Function of Parts

BKPF-101A Connector Panel

D2 ADC
VIDEO IN
1 VIDEO IN connector
2 Loop-through output connector
EQ OUT
1
3 EQ OUT connectors
2
3
SDI OUT
1
4 SDI OUT connectors
2
3
4
BKPF-101A
1 VIDEO IN (analog video signal input) connector
(BNC type)
Accepts an NTSC analog composite video signal.
2 Loop-through output connector (BNC type)
Outputs the signal supplied to the VIDEO IN
connector as-is.
When this output is not used, attach a commercially
available 75-ohm terminator.
3 EQ OUT (equalizer output) connectors (BNC
type)
Output the signal supplied to the VIDEO IN connector
after a cable compensation process.
Connectors 1 to 3 output the same signal.
4 SDI OUT (serial digital signal output)
connectors (BNC type)
Output a 4fsc composite serial digital video signal
converted from the signal supplied to the VIDEO IN
connector.
Connectors 1 to 4 output the same signal.

BKPF-101CB Connector Panel

D1 ADC
ANALOG IN
Y/G
1 ANALOG IN connectors
B-Y/B
R-Y/R
SYNC
2 SYNC connector
SDI OUT
1
3 SDI OUT connectors
2
3
4
BKPF-101CB
1 ANALOG IN (analog video signal input)
connectors (BNC type)
Accept analog component video signals (Y, R–Y, B–
Y) or RGB signals.
2 SYNC (sync signal input) connector (BNC type)
Accepts a sync signal.
3 SDI OUT (serial digital signal output)
connectors (BNC type)
Output a 4:2:2 component serial digital video signal
converted from the signals supplied to the ANALOG
IN connector.
Connectors 1 to 4 output the same signal.
5 (E)