Bkpf-101Cb - Sony BKPF-101A Operation Manual

Specifications

BKPF-101CB

General
Operating temperature
5°C to 40°C (41°F to 104°F)
Storage temperature –20°C to +60°C (–4°F to 140°F)
Operating humidity 10% to 90% (no condensation)
Board: 195 × 310 mm (h/d)
Dimensions
3
(7 /
4
Connector panel: 195 × 25 mm
(h/w) (7
Mass Board: approx. 540 g (1 lb 3 oz)
Connector panel: approx. 180 g
(6 oz)
Power requirements +5 V DC: 1200 mA
−5 V DC: 600 mA
(supplied from the PFV-D20/
D50/D100A/D200A/D300)
Power consumption 9.0 W
Data transfer
Channel coding Scrambled NRZI
Transmission speed Output: 270 Mbits/s
Amplitude 0.8 Vp-p±10%
Digital output return loss
15 dB or more (5 MHz to 270
MHz)
Signal format Conforms to SMPTE 259M
4:2:2 component serial digital
video signal
Serial digital interface
Inputs
Analog inputs ANALOG IN Y/G, B–Y/B,
R–Y/R connectors (BNC type)
(1 each)
Analog component video signals
or RGB signals (selectable with
a switch on the board)
RGB signals R: 0.7 Vp-p, 75 ohms
G: 0.7 Vp-p, 75 ohms
B: 0.7 Vp-p, 75 ohms
Defined with the color bar
signal 100/0/100/0.
YUV (CCIR) signals:
Y: 1.0 Vp-p (incl. Y sync 300 mV)
B–Y: 0.7 Vp-p
R–Y: 0.7 Vp-p
Defined with the color bar
signal 100/0/100/0.
8 (E)
× 12
1
/ inches)
4
× 1 inches)
3
/
4
YUV (Betacam 7.5% setup) signals:
Y: 1.0 Vp-p (incl. Y sync 286 mV)
B–Y: 0.7 Vp-p, 75 ohms
R–Y: 0.7 Vp-p, 75 ohms
Defined with the color bar
signal 100/7.5/77/7.5.
YUV (Betacam 0% setup) signals:
Y: 1.0 Vp-p (incl. Y sync 286 mV)
B–Y: 0.756 Vp-p, 75 ohms
R–Y: 0.756 Vp-p, 75 ohms
Defined with the color bar
signal 100/0/75/0.
Sync signal input SYNC connector (BNC type)(1)
0.28 Vp-p±10%, 75 ohms (black
burst)
Outputs
Serial digital outputs SDI OUT connectors (BNC
type) (4)
4:2:2 component serial digital
video signal
0.8 Vp-p±10%, 75 ohms
System delay approx. 3.31 µs
Video characteristics
Sampling frequency Y: 13.5 MHz
R–Y, B–Y: 6.75 MHz
Digitization 10 bits
Band width Y: 5.75 MHz
R–Y, B–Y: 2.75 MHz
Y, R–Y, B–Y phase error
20 ns or less
K factor (2T pulse) 1% or less
Signal-to-noise ratio 60 dB or more
EDH Conforms to SMPTE RP165
ISR output information
Error/warning messages: 2 items
Setup messages: 2 items
Design and specifications are subject to change
without notice.