Table of Contents
Advertisement
3.
Connection
3-1.
Location and Function of Connectors
SDI INPUT
AUDIO INPUT
1/2
BKSI-2020
1
2
1 SDI INPUT (digital signal input) connector : BNC type
Receives the 4:2:2 component serial digital signal.
2 Active through out connector : BNC type
Provides the signal with supplied to SDI INPUT connector whose waveform has been shaped (active
output).
3 AUDIO INPUT (digital signal input) connector : BNC type (2 pcs)
Receives the audio signal (AES/EBU format) of channel 1 and 2, and channel 3 and 4.
4 TC IN (time code signal input) connector : XLR type
Provides the time code signal.
5 REMOTE connector : D-sub 9-pin type
Used for RS-422A remote control. SONY DISK PROTOCOL signal is available for this terminal.
n
This connector does not accept SONY VTR PROTOCOL signal.
6 SDDI OUTPUT connector : BNC type (2 pcs)
Provides the SDDI (serial digital data interface) signal.
3-2. Connecting Connector and Cable
If any cable is connected to the connectors on the connector panel when installing or servicing, use the
connector or cable listed below or equivalent.
BKSI-2020 Connector
Panel Indication
Connector
SDI INPUT
BNC
SDDI OUTPUT
AUDIO INPUT
TC IN
XLR 3-pin, Female
REMOTE
D-sub 9-pin, Female
*1: CANNON XLR-3-11C or equivalent
*2: Each length of cables is 5 m, 10 m, and 30 m.
BKSI-2020
TC IN
3/4
3
4
Matching Connector/Cable
Connector
BNC
BELDEN 8281 cable
XLR 3-pin, Male
D-sub 9-pin, Male
RCC-5G/10G/30G Cable
REMOTE
SDDI OUTPUT
1
2
ENCODER
5
6
Sony Part No.
1-560-069-11
1-508-084-11
*1
1-560-651-00(Connector)
1-561-749-00(Shell)
*2
1-751-019-81 (5G)
1-751-019-91 (10G)
1-751-020-21 (30G)
3. Connection
1-5 (E)
Advertisement
Table of Contents
