Table of Contents
Advertisement
3. Connection
3. Connection
3-1. Location and Function of Connectors
ANALOG IN
(PAL)
BKSI-2050P
1
2
ANALOG IN
(NTSC)
BKSI-2050
1
1
1
1 ANALOG IN (analog signal input) connector (BNC type):
1
Received the analog composite video signal.
n
This connector is not received the black-and-white signal, signal with jitter, and signal with unstable
the SCH.
2
2
2
2 Analog signal through out connector (BNC type):
2
Provided the signal with supplied to ANALOG IN connector, just as it is.
If not used this connector, connect a 75-ohm terminator.
3
3
3
3
3 FRAME PULSE OUT (to BKSI-2070) connector (BNC type):
Provided the FRAME PULSE signal in synchronized with the digital video output signal.
Used the synchronized signal as the reference signal of optional Audio AD Converter Board BKSI-
2070.
4
4
4
4
4 DIGITAL OUT (digital signal output) connectors (BNC type):
Converted the signal with provided to the ANALOG IN connector to the 4:2:2 component serial
digital signal.
The converted signal is synchronized with the reference signal and is provided when selecting into
the REF mode.
The converted signal is synchronized with the input signal and is provided when selecting into the
INPUT mode.
The minimum delay time between input and output is about 91.4 µs (about 1.5h) for NTSC model,
and is about 153.3 µs (about 2.5h) for PAL model during the INPUT mode. The same signals are
provided from these connectors 1 to 4.
If the input signal is not received when selecting into the INPUT mode, the 4:2:2 component serial
digital signal are not provided from these connectors.
1-4(E)
FRAME PULSE OUT
1
(TO BKSI-2070)
3
FRAME PULSE OUT
1
(TO BKSI-2070)
BKSI-2050P
DIGITAL OUT
(4:2:2-SDI)
2
3
4
PAL-4:2:2
4
BKSI-2050
DIGITAL OUT
(4:2:2-SDI)
2
3
4
NTSC-4:2:2
BKSI-2050/2050P
Advertisement
Table of Contents
