Configuration File Management - NETGEAR WGT634U Reference Manual

Reference Manual for the 108 Mbps Wireless Media Router WGT634U
Wait for the router to reboot. This may take up to 3 minutes.
5.
Verify that the router firmware has been upgraded by viewing the screen discussed in
6.
"Viewing Wireless Router Status Information" on page
Reset router to factory defaults. This step will erase all the existing configuration settings.
7.
Wait for the router to reboot. This may take up to 3 minutes.
8.
Using the instructions at
9.
the settings you backed up down before upgrading.

Configuration File Management

The configuration settings of the WGT634U Wireless Media Router are stored within the router in
a configuration file. This file can be saved (backed up) to a user's PC, retrieved (restored) from the
user's PC, or cleared to the factory default settings.
From the main menu of the browser interface, under the Maintenance heading, select the Settings
Backup heading to bring up the menu shown below.
Figure 7-7: Settings Backup menu
Three options are available, and are described in the following sections.
7-8
"Backing Up and Restoring the Configuration" on page
April 2004, 202-10018-02
7-1.
7-9, restore
Maintenance