Default Factory Settings - NETGEAR WGT634U Reference Manual

Reference Manual for the 108 Mbps Wireless Media Router WGT634U
• Manual. For 64-bit WEP, enter 10 hexadecimal digits (any combination of 0-9, a-f, or A-F).
For 128-bit WEP, enter 26 hexadecimal digits (any combination of 0-9, a-f, or A-F). These
values are not case sensitive.

Default Factory Settings

When you first receive your WGT634U, the default factory settings are enabled, as shown below.
You can restore these defaults with the Factory Default Restore button on the rear panel. After you
install the WGT634U Wireless Media Router, use the procedures below to customize any of the
settings to better meet your networking needs.
Wireless Access Point
Wireless Access List (MAC Filtering)
SSID broadcast
11b/g RF Channel
Authentication Type
4-6
FEATURE DEFAULT FACTORY SETTINGS
Enabled
All wireless stations allowed
Enabled
SSID NETGEAR
11
Mode g and b
Automatic
WEP Disabled
April 2004, 202-10018-02
Wireless Configuration