Cannot Attach Usb Drive To Usb Port; Troubleshooting The Firmware Upgrade - NETGEAR WGT634U Reference Manual

If you cannot connect to the USB drive using the host name, such as \\WGT634U, use the IP
address.
You can also connect to the USB drive from a Web browser. Type \\ followed by the router's IP
address, for example:
\\192.168.1.1

Cannot Attach USB Drive to USB Port

If your USB flash drive is too wide to attach to the USB port, you can purchase a USB extension
cable to attach your drive. USB cables are not included with the WGT634U Wireless Media
Router.

Troubleshooting the Firmware Upgrade

You must upgrade the firmware periodically when you log in to the administrator console. You can
use the Firmware Upgrade Assistant that appears after login or use the Router Upgrade menu in
the Main ten ace section of the main menu.
Note: When performing a router upgrade, you should use a LAN wired connection directly
attached to the router. Do not use a wireless connection to upgrade the firmware.
When uploading software to the WGT634U Wireless Media Router, it is important not to:
• Interrupt the upload by turning off your computer
• Interrupt the Web browser by closing the window, clicking a link, or loading a new page.
• Interrupt the upload by turning off the router. When the upload is complete, your router will
automatically restart.
Warning: If the Web browser, computer, or router is interrupted, it may corrupt the software.
Troubleshooting
Reference Manual for the 108 Mbps Wireless Media Router WGT634U
April 2004, 202-10018-02
9-9