NETGEAR WGT634U Reference Manual page 31

Securely insert one end of the Ethernet cable that came with your wireless router into a
d.
LAN port on the router such as LAN port 4 (C), and the other end into the Ethernet port of
your computer (D).
D
Figure 3-3: Connect the computers on your network to the router
Note: It is best to use the vertical stand that comes with your router. Be sure to set up
your router so that it has adequate ventilation. Do not stack it on a device that produces a
lot of heat such as a large USB drive.
2. R
ESTART YOUR NETWORK IN THE CORRECT SEQUENCE
Warning: Failure to restart your network in the correct sequence could prevent you from
connecting to the Internet.
First, turn on the cable or DSL modem and wait 2 minutes.
a.
Now, turn on your wireless router by plugging in the power cord, and then wait 30
b.
seconds.
Last, turn on your computer.
c.
Note: If a dialup or network connection usually logs you in to the Internet on startup, do
not run that software or cancel it if it starts automatically.
Connecting the Router to the Internet
Reference Manual for the 108 Mbps Wireless Media Router WGT634U
C
April 2004, 202-10018-02
3-5