Usb Drive Requirements; Using The Usb Drive Setup Wizard To Allow Remote Access From The Internet - NETGEAR WGT634U Reference Manual

USB Drive Requirements

The WGT634U Wireless Media Router conforms to the USB 1.0 and 1.1 (USB Full Speed) and
2.0 (USB High Speed) standards. The approximate USB bus speeds are shown below.
Table 5-1. USB Bus Speeds
Bus Name Speed/Second
USB 1.1 12 Mbits
USB 2.0 480 Mbits
Actual bus speeds will vary, depending on the CPU speed, memory, speed of the network, and
other variables.
The 108 Mbps Wireless Media Router WGT634U should work with all USB-compliant external
flash and hard drives. For the most up-to-date list of USB drives supported by the WGT634U
Router, go to:
http://kbserver.netgear.com/kb_web_files/n101300.asp
The USB port on the 108 Mbps Wireless Media Router WGT634U can only be used to connect
USB storage class devices like hard drives. USB modems, printers, CD ROM drives, and DVD
drives cannot be connected to the WGT634U Wireless Media Router.
Note: The USB port on the WGT634U can be used with one USB hard drive at a time. Do not
attempt to use a USB hub attached to the USB port.
The WGT634U supports FAT, FAT32, NTFS (read only) and Linux file systems. As soon as a USB
hard disk or flash memory is attached to WGT634U USB port, users on the local area network can
access the USB drive with full read and write access.
Using the USB Drive Setup Wizard to Allow Remote Access
from the Internet
You can use the USB Drive Wizard to quickly and easily share directories on the USB drive after
you have attached it to the router.
Log in to the WGT634U router at its default LAN address of
1.
user name of admin and default password of password, or using whatever LAN address and
password you have set up.
Connecting a USB Drive to the Router
Reference Manual for the 108 Mbps Wireless Media Router WGT634U
April 2004, 202-10018-02
http://192.168.1.1 with its default
5-7