NETGEAR WGT634U Reference Manual page 32

Reference Manual for the 108 Mbps Wireless Media Router WGT634U
Power
Check the status lights and verify the following:
• Power: Verify that the power light is on. When you first turn on the router, the power light
blinks while the router performs a diagnostic self test. When the test completes, the power
light turns solid green. If after 2 minutes the power light continues to blink, reset the unit
using the factory Reset button according to the instructions in
Configuration and Password" on page
• Internet: Verify that the Internet light on the wireless router is lit. If not, make sure the
Ethernet cable is securely attached to the wireless router Internet port and the powered on
modem.
• Wireless: Verify that the Wireless light is lit. The factory default setting is for the wireless
feature to be turned on. If you turn off the wireless feature, the Wireless light will go off. If
the wireless feature is turned on but the Wireless light is off, reset the unit using the
factory Reset button according to the instructions in
and Password" on page
• LAN: A LAN light is lit. Green indicates your computer is operating at 100 Mbps speed.
Amber indicates 10 Mbps speed. If no LAN lights are lit, check that the Ethernet cable
connecting the powered on computer to the router is securely attached at both ends.
3. L
OG IN TO THE WIRELESS ROUTER
From your computer, launch a browser such as Internet Explorer or Netscape
a.
Connect to the wireless router by typing http://192.168.1.1 in the address field of your
browser.
3-6
Internet
Wireless
9-7.
April 2004, 202-10018-02
LAN Port 4
9-7.
"Restoring the Default Configuration
Connecting the Router to the Internet
"Restoring the Default
Navigator.
®