NETGEAR RangeMax DG834PN Reference Manual page 64

Reference Manual for the DG834PN RangeMax
Table 5-2. Router Statistics Fields
Field
WAN, LAN, or Serial
Port
Status
TxPkts
RxPkts
Collisions
Tx B/s
Rx B/s
Up Time
ADSL Link Downstream
or Upstream
Connection Speed
Line Attenuation
Noise Margin
Poll Interval
5-8
Description
The statistics for the WAN (Internet), LAN (local), and Serial ports. For each port,
the screen displays:
The link status of the port.
The number of packets transmitted on this port since reset or manual clear.
The number of packets received on this port since reset or manual clear.
The number of collisions on this port since reset or manual clear.
The current line utilization—percentage of current bandwidth used on this port.
The average line utilization for this port.
The time elapsed since the last power cycle or reset.
The statistics for the upstream and downstream ADSL link. These statistics will be
of interest to your technical support representative if you are having problems
obtaining or maintaining a connection.
Typically, the downstream speed is faster than the upstream speed.
The line attenuation will increase the further you are physically located from your
ISP's facilities.
This is the signal-to-noise ratio and is a measure of the quality of the signal on the
line.
Specifies the interval at which the statistics are updated in this window. Click Stop
to freeze the display.
v1.0, November 2005
TM
ADSL Modem Wireless Router
Managing Your Network