How To Set Up And Test Basic Wireless Connectivity - NETGEAR KWGR614 Reference Manual

How to Set Up and Test Basic Wireless Connectivity

Note: If you use a wireless computer to configure WPA settings, you will be disconnected
when you click Apply. Reconfigure your wireless adapter to match the new
settings or access the wireless router from a wired computer to make any further
changes.
Follow the instructions below to set up and test basic wireless connectivity. Once you have
established basic wireless connectivity, you can enable security settings appropriate to your needs.
1. Log in to the KWGR614 wireless router at URL
user name of admin and default password of password, or whatever LAN address and
password you have set up.
2. Click Wireless Settings in the Setup section of the main menu of the KWGR614 wireless
router.
Figure 2-4
Wireless Configuration
54Mbps Wireless Router Model KWGR614 Reference Manual
http://www.routerlogin.net.
v1.2, September 2006
Enter the default
2-9