How To Set Up And Test Basic Wireless Connectivity - NETGEAR DG834GSP Reference Manual

Adsl modem wireless router
Hide thumbs Also See for DG834GSP:
Table of Contents

Advertisement

Table 4-1.
Wireless Security Options (continued)
Field
Description
WPA Pre-Shared-Key (Wi-Fi Protected Access Pre-Shared Key) uses a pre-shared key
WPA-PSK
to perform the authentication and generate the initial data encryption keys. Then, it
(TKIP), WPA2-
dynamically varies the encryption key. WPA-PSK (TKIP) implements most of the IEEE
PSK (AES)
802.11i standard and is designed to work with all wireless network interface cards, but
not all wireless access points. WPA2-PSK (AES) implements the full standard, but will
not work with some older network cards. For a full explanation of WPA, see
Communications" in Appendix
By default, your unit is configured for WPA-PSK, which is the recommended encryption
method to use with Windows Vista.
User authentication is implemented using 802.1x and RADIUS servers. For a full
WPA-802.1x,
explanation of WPA, see
WPA2-802.1x
Fill in the following:
• Radius Server Name/IP Address
This field is required. Enter the name or IP address of the Radius Server on your LAN.
• Radius Port
Enter the port number used for connections to the Radius Server.
• Radius Shared Key
Enter the desired value for the Radius shared key. This key enables the DG834GSP
to log in to the Radius server and must match the value used on the Radius server.

How to Set Up and Test Basic Wireless Connectivity

Follow the instructions below to set up and test basic wireless connectivity. Once you have
established basic wireless connectivity, you can enable security settings appropriate to your needs.
1. Log in to the DG834GSP modem router at its default LAN address of http://10.1.1.1 with its
default user name of admin and default password of password, or using whatever LAN
address and password you have set up.
2. Click the Wireless Settings link in the main menu of the DG834GSP modem router.
3. Set the Region. Select the region in which the wireless interface will operate.
4. If necessary, set the Channel. The default channel is dependent on the MAC address.
Wireless Configuration
Reference Manual for the ADSL Modem Wireless Router DG834GSP
C.
"Wireless Communications" in Appendix
v1.0, June 2007
"Wireless
C.
4-7

Advertisement

Table of Contents
loading

Table of Contents