NETGEAR KWGR614 Reference Manual page 28

54Mbps Wireless Router Model KWGR614 Reference Manual
3. Choose a suitable descriptive name for the wireless network name (SSID). In the SSID box,
enter a value of up to 32 alphanumeric characters. The default SSID is NETGEAR.
Note: The SSID is case sensitive; NETGEAR is not the same as nETgear. Also, the
SSID of any wireless access adapters must match the SSID you configure in
the 54Mbps Wireless Router Model KWGR614. If they do not match, you will
not get a wireless connection to the KWGR614.
4. Set the Region. Select the region in which the wireless interface will operate.
5. Set the Channel. The default channel is 6.
This field determines which operating frequency to use. It should not be necessary to change
the wireless channel unless you notice interference problems with another nearby wireless
router or access point. Select a channel that is not being used by any other wireless networks
within several hundred feet of your wireless router. For more information on the wireless
channel frequencies please see
6. For initial configuration and testing, leave the security option set to "Disable".
7. Click Apply to save your changes.
Note: If you are configuring the wireless router from a wireless computer and you
change the wireless router's SSID, channel, or security settings, you will lose
your wireless connection when you click Apply. You must then change the
wireless settings of your computer to match the wireless router's new settings.
8. Configure and test your computers for wireless connectivity.
Program the wireless adapter of your computers to have the same SSID and channel that you
configured in the router. Check that they have a wireless link and are able to obtain an IP
address by DHCP from the wireless router.
Warning: The Network Name (SSID) is case sensitive. If NETGEAR is the
Once your computers have basic wireless connectivity to the wireless router, you can configure the
advanced wireless security functions of the wireless router.
2-10
"Wireless Communications" in Appendix
Network Name (SSID) in your wireless router, you must enter
NETGEAR in your computer's wireless settings. Typing nETgear will
not work.
v1.2, September 2006
B.
Wireless Configuration